Lithophane maker

Turn a photo into a lithophane STL: a thin panel that shows the picture when lit from behind. Everything runs in your browser; the photo is not uploaded.

1. Image and settings

Mode

2. Preview and download

Print lithophanes upright, in white PLA, with 100% infill. Hold to a light to see the image.

How it works

  1. Pick a photo, or try the sample.
  2. Set the width and the thinnest and thickest points in millimetres.
  3. Check the 3D preview and the printability result.
  4. Download the STL, print it in white and hold it to a light.

Tips for a good lithophane

  • Portraits and landscapes with clear light and shadow work best; crop to the subject first.
  • Use “Fine” detail (0.2 mm) for photos up to about 150 mm wide.
  • Want a raised picture on a plate instead? Use image to STL.

Questions

What is a lithophane?

A thin panel whose thickness follows a photo: thick where the photo is dark, thin where it is light. With a light behind it, the picture appears.

Is my photo uploaded?

No. The photo is processed by your browser on your device, and the STL is created locally. Nothing is sent to a server.

What thickness should I use?

A common start is 0.8 mm at the thinnest point and 3 mm at the thickest. Thinner panels let more light through; thicker ones show more contrast.

How should I print it?

Use white or natural PLA, 100% infill and a small layer height (0.1–0.12 mm). Printing the panel upright gives the smoothest detail; add a brim for stability.

Why is there a border?

The frame (3 mm by default) is full thickness. It makes the panel stiffer and easier to stand. Set it to 0 if you do not want it.