Make a 3D-printable QR code plate or keychain from any link or text. Set the size in millimetres, check it in 3D and download the STL. Nothing you type is uploaded.
Questions
Will the printed QR code scan?
The code is built from the same pattern a phone reads, and our tests check that the top view of every generated STL decodes back to the exact text. To scan well, print it in two colours and keep modules at least 1 mm wide.
How do I print it in two colours?
Print the plate in a light colour and change to a dark filament at the plate thickness (2 mm by default). Most slicers have a “pause” or “colour change” at a layer height for this.
Is my text or link uploaded?
No. The QR code and the STL are made by your browser on your device. Nothing you type is sent to a server.
Which error-correction level should I pick?
Medium works for most uses. High survives scratches and dirt but makes the code denser, so it needs a larger print. Low makes the smallest code.
Can I make a keychain?
Yes. Tick “Keychain tab with a hole” to add a tab with a square hole on the left side. The hole size is set in millimetres.